Ring-O-Matic Manufacturing Co., Inc. -- Pella, Iowa

Pit Cleaners

The Ultimate Labor Saving Device

	The Ring-O-Matic Model 500T Pit Cleaner is our intermediate sized model which weighs 1500 lbs. Its 44 cubic foot capacity box carries loads up to 4000 lbs. A dependable OHV 5.5 HP Briggs&Stratton engine drives the hydraulic pump providing power to operate the pit cleaner. The operator controls the entire loading and unloading process with four control levers located at the rear of the machine. The entire operation can be viewed from the controls.
The 12" wide hydraulic clam bucket has a 20" bite when fully opened -- the boom swings 6' from left to right for use in wide pits. It requires 96" of overhead clearance. The unit digs 5' deep. The bucket holds 1 1/3 cubic feet of material. The hydraulic boom is capable of pushing the mud and submerging it. A Ring-O-Matic Pit Cleaner enables one man to clean pits quickly, efficiently and with little physical labor.
Optional Features:
180 Degree Rear Boom This option enables the operator to clean pits constructed perpendicular to the direction of travel through the bay. Models not equipped with this feature swing 6' from left to right (52 degrees). This option allows the boom to swing 180 degrees from left to right.
Spoiler & Lid (anti-splash kit) The spoiler and lid protect the machine from spillover and splashing. The spoiler protects the front while the lid protects the engine and controls at the rear.

Ring-O-Matic Manufacturing Co., Inc.
PO Box 305
Pella, Iowa 50219
641-628-1515 or 800-544-2518

email: info@ring-o-matic.com